Product Features Rugged and durable industrial-grade mechanical design;
Maximum output power 50W@1064nm, 30W@355nm...../532nm;
Ultrashort pulse output <10ps;
Burst mode output, maximum number is 63;
Single pulse-4MHz repetition frequency;
The frequency can be divided according to the demand, the maximum number is 31;
POL/POD, computer moisturizing
1. Micromachining of brittle materials such as glass, sapphire, and ceramics;
2. Ultra-precise mark points, tiny invisible QR codes (0.2mm*0.2mm) and other fine markings on glass materials;
3. Processing traceability marks on metal medical devices with functions such as acid corrosion resistance and oxidation resistance;
4. Cutting, drilling or removing surface coating on plastics, oxides and organic materials;
5. Logo identification on the surface of high-end electronic products;
6. Fine forming of superhard materials;
6. Replace chemical corrosion processing depth on metal materials.
model | HL-PS-1064-20/30/50 | HL-PS-532-12/18/30 | HL-PS-355-8/12/20 |
Output Characteristics | |||
wavelength | 1064nm | 532nm | 355nm |
power | 20~50 W @ 1000kHz, typical | 12~30W @ 1000kHz, typical | 8~20 W @ 1000kHz, typical |
Repetition frequency | Single pulse to 4000 kHz | ||
Pulse Width | <10ps | ||
Pulse stability | <2% rms @ 1000 kHz, typical | ||
Beam characteristics | |||
Spatial Mode | TEM00 | ||
M2 | <1.3 | ||
Degree of Polarization | 100:1 vertical | 100:1 Level | 100:1 vertical |
Spot diameter | 2.1 mm ±0.2 mm | 2.4 mm ±0.3 mm | 2.4 mm ±0.3 mm |
Divergent full angle | <2 mrad | ||
Light spot symmetry | >85% | ||
Beam directivity | < 25 µrad/°C | ||
Working conditions/environmental requirements | |||
Power Requirements | 100-240V, 50-60Hz | ||
Ready time | Standby to ready <10 minutes; Cold start to ready <30 minutes | ||
Temperature range | 18 ~35°C when working; 0~50°C when not working | ||
humidity | 10–90%, non-condensing | ||
Cooling requirements | Water cooling, chiller accuracy ±0.1°C, flow rate at least 6L/min | ||
Total heat consumption | <1000 W | ||
Physical properties | |||
Laser head size (L × W × H) | 700 x 400 x 163 mm | ||
Laser head weight | 56 kg | ||
Controller size (L × W × H) | 440 x 432 x 132mm | ||
Controller weight | 19.3kg | ||
